General Electric “sets the record straight” on its reactor containment.

Official GE website sales blurb on the wonders of Reactor containment.
First, the results in pictures.

Official fallout map which ignores the government circles of risk.

New York Times photo of the containers of contaminated water which leaks constantly from the GE containment.

children living in contaminated areas the government refuses to evacuate but issues with dosimeters instead.

The GE description of its wonderous containment, from the GE Website

Setting the Record Straight on Mark I Containment History
March 18, 2011

Recently, several news stories have reported that the design of the Mark I containment system in the nuclear reactors at the Fukushima Daiichi Power Plant has a history of problems. As the speculation contained in these stories has been picked up by a number of other media outlets and political commentators, we’d like to set the record straight. We believe it is too early to know specifically what has happened in each of the reactors at Fukushima Daiichi. We are committed to participating in the search for the facts. However, we can address the 40 year history of the technology and its performance to date:

Claim: The Mark I reactor is less “physically robust” than competing pressurized water reactors.

Fact: The Mark I meets all regulatory requirements and has performed well for over 40 years. Differences in the primary containment systems used in different reactor designs – including differences in size of the containment vessel — are largely a function of the different operating characteristics of those designs. For example, GE’s containment systems utilize pressure suppression technology, where a pool of water is available to condense steam in the event of an accident and reduce the pressures on the containment vessel. Units are built to withstand predicted peak containment pressures based upon their design under accident guidelines.

Claim: The Mark I should have been discontinued, based on a statement made in 1972 by Stephen Hanauer, an Atomic Energy Commission official, who said that its smaller containment design was more susceptible to explosion and rupture from a buildup of hydrogen.

Fact: In 1980 the NRC advised that it had given careful consideration to concerns raised by Mr. Hanauer’s 1972 memorandum about the Mark I and that “the staff, including Dr. Hanauer, has concluded that the pressure suppression concept for containment design is safe.”

Claim: The Mark I was “cheaper and easier to build – in part because they [GE] used a comparatively smaller and less expensive containment structure.”

Fact: Because of the pressure suppression capability designed into the Mark I, we are able to have a smaller containment design. The pressure suppression technology enables the Mark I to reduce the pressure in the containment vessel by condensing steam in the suppression pool. Safety remained our top priority, and the Mark I design met all NRC design criteria.

Claim: Modifications made to the Mark I over the last decades were driven by threats of lawsuits from utilities over alleged flaws in the system.

Fact: The Mark I containment designs were modified in the 1980’s to address improvements in the technology and changing regulatory requirements. All of these changes required by regulatory authorities have been implemented. The changes resulted from operational experience and improvements in technology and had nothing to do with lawsuits.

Reassuring the containment is so good isn’t it?

%d bloggers like this: